JPligger – Joomla & Pligg Integration Mambot
Current Version: 1.0 Beta
License: GPL
Description: This mambot will sync Joomla and Pligg login with ease.
Tested on: Joomla 1.0.13; CB 1.1; Pligg 9.8.2
Looking for JPligger for Joomla 1.5 and Pligg 9.9? See here.
Note : CB is not required for this mambot to work
Detail Description: This mambot will allow you to run Pligg inside Joomla using Wrapper. It will sync user registration, login and forgot password between Joomla, CB and Pligg.
Support: Community Driven and If I find time.
Ideal Installation:
- Use at your own risk! Backup first or use in test environment first.
- Install Joomla in root folder
- Install Pligg in /
- Note DB settings of Pligg
- Install JPligger Mambot in Joomla
- Visit its settings (In admin > Mambots > JPligger)
- Provide details of Pligg DB
- Publish and Save
- Hide Registration through Pligg. Instructions here: hide-pligg-registration.txt
Optional Information: Pligg inside Joomla wrapper
- Link your Pligg in Joomla wrapper
- Use on /
in Wrapper Link Field - Set width and height to 100%, no scrollbar, yes to auto height.
- Remove Pligg Header. Edit /
/templates/ /header.tpl (Remove as much as you can. Trail and Error) - Remove Pligg Footer. Edit /
/templates/ /footer.tpl (Remove as much as you can. Trail and Error) - Remove unwanted Siderbar modules. Edit /
/templates/ /sidebar.tpl (Remove Login/Registration Module and others as much as you can. Trail and Error) - Fit Pligg into wrapper:
Edit CSS file of your Pligg template
Find Contentbox and edit its width, find Sidebox and edit its width, find Wrap and edit its width
Note: Depending on your joomla template width, set wrap width to max. Then split the max width between Contentbox and Sidebox. Also remember that there is padding in between so take that into account as well. - Thats all you need but if you want to dig down and integrate fully, there are more things that can be done.
Download JPligger Plugin for Joomla 1.5 and Pligg 9.9 here.
27 Responses to “JPligger – Joomla & Pligg Integration Mambot”
By grawat on May 3, 2008 | Reply
I tried installing this on joomla 1.5 with Legacy enabled but I got this error “Direct Access to this location is not allowed.” and I wasn’t able to access the entire joomla site. Is there a way to make this work with joomla 1.5 ?
By grawat on May 3, 2008 | Reply
When I changed the order to 3 I didn’t get the error but then I don’t know if the plugin was working. As I registered in joomla and wasn’t able to login with the same account in pligg. And when I changed the order back to 0 I got the same error “Direct Access to this location is not allowed.”
By boxed on Jun 10, 2008 | Reply
grawat,
As of now, this mambot doesnt support Joomla 1.5. I am coming up an upgrade soon.
By Scotto on Jun 11, 2008 | Reply
Thanks for your efforts to combine my two favorite CMS’s. I’m definitely going to keep updated here with any progresses made.
I see that this works for Joomla 1.0.13; CB 1.1; Pligg 9.8.2.
I’m going to be trying this for Joomla 1.0.15, CB 1.1, and Pligg 9.9. Not sure if it’s been tested yet.
By boxed on Jun 11, 2008 | Reply
As of now it will fail. I have people who tested it on 1.5 it wont work.
By willin on Nov 10, 2008 | Reply
Hello? Is there a support forum where to posts some questions? I installed pligg 9.9.5 y Joomla! 1.5.6 and it’s working, but…
How can I access my plig admin panel, to change languages and other settings… also, if I click the Pligg wrapper link and I’m not logged in Joomla! the page don’t show, I must be logged in to see the pligg site, I checked the parameters of the link and is on public mode ¿?
Any help? Thanks in advance…
Regards from Iquique, Chile
Willin
By boxed on Nov 10, 2008 | Reply
Hi Willin,
As of now I can only provide support via this comments.
To access your pligg admin section directly go to the admin url. It should be something like yoursite.com/pliggfolder/admin.php
You can also try to login as admin the joomla site and then go to pligg pages. You should see the admin link on the pligg menu and browse through. If you need help let me know.
By willin on Nov 11, 2008 | Reply
Hi… thanks for the answer… It’s stranger, but I have not access in any way to the admin panel… Also there is no admin link in the pligg menu.
I will to delete all the pligg tables in my joomla db, delete the plugin and delete de pligg folder, and then install it again. Let’s see if this is the problem.
By boxed on Nov 11, 2008 | Reply
If you are using the standard pligg template you should see the admin link in the horizontal menus (that is only after you login as admin). Remember pligg admin could be different than joomla admin. So login as pligg admin. Better yet, create a user in joomla as ‘god’(which is standar pligg admin username) and login and try. if you need help, let me know.
By willin on Nov 13, 2008 | Reply
Hello! Thanks for the answer… Actually i try to install Pligg in local to see how it’s works and found this:
I installed joomla 1.5.6 by bitnami.org and configured with my admin nickname and password, then I installed pligg 9.9.5 and edit the admin nick “god” and password, to the same in joomla.
Then I installed the mambot and provided all the database details.
I went to menu administrator and created a new wrap link and wrapped pligg
Also I Hide Registration through Pligg.
But… when I click in the pligg menu link it’s shows me a page that says I must be registered to view the page, but actually I’m loged in and can not see the pligg content.
Any idea about this? Apreciate your help.
Regards
Willin
By boxed on Nov 13, 2008 | Reply
@Willin,
Couple of things. First, since you are using J1.5, I hope you are using this JPligger 1.2 http://www.vaked.com/jpligger-12-joomla-15-and-pligg-99-integration/ instead of the mambot on this page (JPligger 1.0). Next please make sure all the database settings are correct in the plugin (most common cause for it to not work properly).
Register a new normal user account via Joomla and then browse to wrapper (where pligg is loaded). If that doesnt work, please review the installation steps. If you still face problem let me know.
Thanks.
By willin on Nov 13, 2008 | Reply
Boxed… the pluggin was ok, that wasn’t the problem… I desinstall the pluggin and installed again but in the parameters pluggin “site url” I include only localhost (actually the real url is http://127.0.0.1/joomla and in the main menu, pligg link works ok… But….
I can’t go to the pligg admin panel, inside the wrapp i click on the admin link that should be http://127.0.0.1/joomla/pligg/admin_index.php but I have nothing… a blank wrapped page, any idea?
By boxed on Nov 13, 2008 | Reply
Try accessing the pligg admin url in a new window and see if anything loads up. Make sure to first login as pligg admin via joomla login.
By Jack on Dec 1, 2008 | Reply
Hi, thanks for making this.
Unfortunately, I cannot get it to work.
Versions: Pligg 9.9.5 with Joomla 1.5.8 (then tested again with a clean install of Joomla 1.5.7, but no luck there either)
I have been testing locally (localhost)
My questions:
- When you say “install pligg in /”, does that mean it should be inside or outside the joomla folder? My Joomla folder is localhost/liberty and my pligg folder is localhost/pligg. Should my pligg folder be localhost/liberty/pligg?
- The last plugin parameter says site url. My Joomla site is at localhost/liberty and my pligg site is at localhost/pligg. What should this parameter be?
[I also posted this comment in the Jpligger 1.2 article]
-Jack
By deee on Feb 12, 2009 | Reply
HI,
I installed the plugin it all went ok registered a user and it automatically signed me into pligg, but it doesn’t log out from pligg once i log out in joomla. After i logout it doesnt log me back in. I dunno why
By Shay on Jun 12, 2009 | Reply
I try it on joomla 1.5.11 + CB 1.2 + pligg 1.0
Not working well…users not sync and can’t logout from joomla if JPligger is on…
Any solution?
By oggito on Jul 1, 2009 | Reply
Hi,
great work. I have a problem though. When I register a new user through joomla and sign in, my categories do not show any more. If I register a user through pligg and sign in the same user through joomla, everything is ok. Please can you give me a clue? Thank u. in advance.
By boxed on Jul 8, 2009 | Reply
@Shay and @Jack, please use the plugin for J1.5 here http://www.vaked.com/jpligger-12-joomla-15-and-pligg-99-integration/
@deee log out and log in only should happen through Joomla.
@oggito can you tell me the version you are using?
By marco on Jul 12, 2009 | Reply
Hello
can you tell me if this plugin is used by Joomocracy.com? Also, can you tell me if you would be available to install the plugin and roughgly what would be the cost?
regards
Marco
By boxed on Jul 20, 2009 | Reply
@marco I think Joomocracy.com is out of the box a pligg site. I dont think it has Joomla in it or atleast Joomla integrated with Pligg. If you are interested in installation please contact me.
By Jason on Sep 16, 2009 | Reply
I’ve installed the plug-in for Joomla! 1.5 and the newest version of Pligg, and I must say it does work very well. But i’m having some problems with the wrapping pligg in a Joomla! wrapper. How do i do the first 3 (1. Link your Pligg in Joomla wrapper
2. Use on / in Wrapper Link Field
3. Set width and height to 100%, no scrollbar, yes to auto height.) Steps?
By David on Jan 19, 2010 | Reply
I also cannot access my pligg admin. There is no link in the pligg section.
I am using Joomla 1.5.9 and this is what I could find for JPligger
JPligger 1.2
Am I using the right version and if so what do I need to do to be able to get to the pligg admin side.